You are not logged in.
Using IR1A 3.5 with PT10 on a Mac Pro and Lion. Every time I re-open a session with IR1A, I get an "Error: File not found," and have to manually re-select the IR in question. (Also, possibly related: Sometimes I have to click an IR several times (or click one, click another, click the first) in order to get it loaded.) IR library is in default location.
Also, plug-in does not properly save IR starting time values. I have to click (but not turn) that knob in order for that value to re-load.
Because of these two issues, I rarely use IR1A these days—too easy to forget to go through these steps when recalling a mix.
Thanks for bringing it to my attention, I'll address these issues in the 3.6 update which will be out at the beginning of April.
Great to hear. As I said, I love the plug-in, but I almost never use it because of these issues. Looking forward to 3.6.
The 3.6 update is done, this issue has been fixed.
I've also added wet/dry ratio link and bypass buttons.
Will post to site shortly.
Update now available.
"File not found" error is gone, which is awesome. However, the plug still loses the start value when re-opening a session, which makes it remain mostly unusable (I use a lot of custom spring impulses, and almost always modify the start values to tame the "sproing").
Again, the start value is displayed, but it only kicks in when you click (but don't necessarily turn) the start knob.